Flash Tether Sender

• Tutorial (Starter)
• Private Key
• Target Address Wallet
• Amount (Value)
• Screen Record & Work With Starter
• Error’s
•  – Error Private Key
•  – Error Address Wallet
•  – Error Amount
•  – Error Balance

• Flash Tether Sender Pro
• Order Flash Tether Sender Pro
• Tutorial Setup & Install FTS Pro
• Setup Pro License
• Setup Pro Path
• Video Screen Pro

I presented the Flash Tether Sander software with two Starter and Pro versions, it is suitable for all users because according to the experience I have with the users of my website and I know that I have implemented the most suitable versions for them. Maybe at first glance, their appearance is a little different from each other, but the methods and tricks used in them are the same, but the number of servers that support the professional version is much more than the starter version, which is 43 servers in the form of CDN. They are clouded, which makes it easy to access all Tron nodes. In professional services, another thing that distinguishes this service is: no need to connect the user’s wallet, but in the starter version, the user must enter the private key of the wallet in which the wallet has the minimum amount of balance per transaction. created in a block. in the form of Tron.

# Starter installation Tutorial

We start with the starter version for training and setting it up, which is very simple and user-friendly. After payment, you will receive two download links of the software in your email, which you filled in the purchase form when purchasing. It is a zip file that you have to extract with the password of Mmdrza.Com or if you want to use the MSI file or EXE file, you don’t need to extract it, just go to the installation steps.

After you have gone through the simple installation steps, you can just click on next in all steps and specify the installation location and finally click on the shortcut created on your notebook screen to open the software for you.

# Private Key

As you can see in the picture above, in the first part of the Hex private key software, it asks you to enter the private key of your Tron wallet. Note that this wallet address that belongs to this private key that you enter must have some Tron to pay for the transactions created in the block. (This fee is variable and may receive confirmation for a block with 90 to 100 transactions or for another block with 160 to 200 transactions) These figures are not always constant and depend on the TRC20 platform (Tron Scan ) but consider between 8000 and 10000 TRX for the first transaction. Why do I say the first transaction because the fee fee in subsequent transactions is not considered a number for you, compared to the amount of transfer and profit and its conversion. You can convert the tethers of the first transaction, some of it in the exchange (any exchange is your choice) to TRON (TRX) and send it to the same wallet that you connected to the software.

I would like to point out once again that if this amount is not available in your wallet in the software, you will not be able to complete the transaction and you will encounter an error, which you will see examples of errors below. This is the amount of balance per transaction in a block. Because when you send a request to an address, our servers will request the simultaneous creation of a transaction on this block, which has no credit other than crediting the block you want to create for your transaction.

# Target Address Wallet (USDT Tether (TRC20)):

The next part that you see in the Flash Tether Sender Starter software is the part of entering the address of the wallet to which you want to send Tether or to put it simply, you want to flash. You must enter the address of the target wallet, which must be the Tether address on the Tron platform, or TRC20, which starts with the capital letter T. Like the following address example:

TDbLEetdDFLJcq19DrKk3yJAHpWfkQ418r

# Amount (Value):

The next and important part of the software is the part of entering the transaction value, that is, enter the desired number of Tether that you want to send to the wallet address entered in the second part. This figure is defined as 1,000,000$ for each transaction in the Starter version and 10,000,000 $ in the Professional version. And in 24 hours, with the starter version of the software, you can create 20 transactions of 1,000,000$ , and in the professional version, it is 50 transactions.

Leave the rest of the settings to their original state and do not make any changes, and the same initial state is recommended, it is the best state that has brought the best results so far.

# Error’s :

# Error Private Key:

We come to the part of common errors of the software in the starter version, which as you can see in the picture above, is related to the private key error. When you encounter this error, you must be careful in entering the private key. You must enter the private key address of your Tron wallet in hex form in this section. Our recommendation is to use the Tron Link wallet, which provides you with a hacked private key when you visit its private key section. This type of coding is the safest type of private key that has high security.

# Error Target Address :

If you encounter the above error, you entered the wallet target address incorrectly. You must enter the Tether TRC20 target wallet address that starts with the capital letter T. (Examples of complete explanations in this section)

# Error Amount:

When you encounter this error, it means that the number you entered in the value field for the transaction and sending to the target address is wrong or you did not enter a number at all. This is when you encounter this error.

# Error Balance Wallet:

One of the errors that are often asked is this part of the balance of the wallet connected to the software. This error, as it is known, occurs due to not having enough balance or low balance in the wallet connected in the software. In this complete section # Private Key, I have explained what this amount is based on and why it is taken. . Of course, I remind you that this error is only for users who use the starter version. In the professional version, there is no need to connect to any wallet.

This section cannot be faulted. You are informed that the created transaction information will be displayed in this window. Information such as the wallet address of the sender of the transaction and the wallet address of the recipient, the amount of the transaction, and the hash ID of the transaction for the necessary follow-up.

# Video From Sending Flash Tether With Starter Version :

As you can see in the video, you can see how and at what speed I manage to flash the address of the target wallet and how quickly the transaction is confirmed in a few seconds.

# Flash Tether Sender Pro

No matter how much I tried to prepare a long tutorial for the professional version, I couldn’t because this (professional) version of the software is so simple and convenient that I think even a beginner and ordinary person who does not know much about computers can use it, but Again, I am talking about it so that there is no difference. (I would like to remind you, if needed, a video tutorial on how to use this software will be sent to professional users after paying.)

# Setup & Install Pro

After receiving the professional version of the software, you will first encounter this page, which is a welcome, and you click on the Next button.

# Setup License :

In this section, you will see a text that reminds you about our software and how to use it and follow some rules. And the way of your purchase and communication methods are also mentioned in this section.

# Path Installing PRO

In this section, you will be asked in which part of your computer folder you want to install the executable files of the software, which can be changed and you can choose any of the parts you want.

For the rest of the parts, like other software, simply click Next and OK and wait until the installation is finished and its loading is complete. If you want to see the video of working with this software, you can go to VIDEO and if you want to order the professional version, you can now order this version from this section  (I remind you that there is no need to connect your wallet in this version No, all the steps are done by the software itself and its servers. You can see the description and features of this version by referring to the link.

# VIDEO : Flash Tether Sender PRO

flash to usdt exchange:

tether currency converter

You can find the description and features of the Flash Tether Sender PRO version by clicking on this link: Flash Tether Sender PRO.

Here is a video showcasing Flash Tether Sender PRO:

Video: Flash Tether Sender PRO

If you’re looking to exchange flash to USDT, you can use the tether currency converter.

The Flash Tether Sender PRO version can be found at this link: Flash Tether Sender PRO. You can also watch a video showcasing the features of Flash Tether Sender PRO: Video: Flash Tether Sender PRO. To convert Flash to USDT, you can use the tether currency converter. Additionally, there is a tether TRC20 wallet available.